CompatibilityTo confirm that this part fits your vehicle, please enter your vehicle's details below.
Item No.:Eachine ET1 Color: Sliver Weight: About 2.2kg(Engine+Wooden Base) Size Of Wooden Base: 180*66*50mm(L*W*H) Ltinerary: 20mm Fuel: ZIPPOOil or Gasoline Weight: 1610g Spare Parts: For Rubber Ring 2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there's no air in the oil pipe. 4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position) 2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. 1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 2.Please allow little differs due to manual measurement. 4.Kids under 8 are not recommended to play. With Base |
Similar Products
|