Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Specification:

Brand:Eachine

Item Name:Eachine ET5 Pro

Size:170*94*85MM

Displacement: 1. 6CC

Cylinder diameter: 13MM

Itinerary: 12MM

Weight: 1700G

Feaqtures:

1. Check the wiring of the engine from the board, connect the fuel tank pipeline, and install a No 5battery(1. 5v)

2. Use gasoline(95 #)to fill the fuel tank. After the filling is completed, turn the flywheel clockwise onthe right side of the engine(power switch surface)for many turns. No air can be generated

3. Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine(power switch surface)to start the engine

Precautions:

The engine is water-cooled, and you need to add water before each work. When you finish the work,you need to save the water.

The working environment should be ensured in a clean environment to reduce the possibility of dust entering the carburetor.

The carburetor oil needle has been adjusted in the best position before shipment. It is notrecommended to make a large adjustment. But it can be fine-tuned under different fuels.

The cylinder head cover can be disassembled and lubricated on the valve mechanism.

After the engine stops working, you need to remove the battery and save it.

2. Troubleshooting method:

3. Lubrication methods and methods can add no more than 4ML of lubricating oil to the crankcase toensure splash lubrication of the crankshaft.

Note:

Package Included: