Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Brand: Eachine

Displacement: 6CC.

Cylinder diameter: 22MM

Itinerary 20MM

Weight: 1610G

Material: Brass And Stainless Steel

1.Check the wiring of the engine from the board, connect the fuel tank pipeline, andinstall three No 5 batteries( 4. 5v).

2. Add water to the engine water tank. Use gasoline(95#)to fill the fuel tank. After thefilling is completed, turn the flywheel clockwise on the right side of the engine formany turns. Its function can make the mixed fuel fully enter the cylinder. Make surethe fuel pipe No air can be generated.

3. Turn on the power switch and quickly rotate the flywheel clockwise on the right sideof the engine to start the engine.

1. If the ignition device is normal and the cylinder compression is normal, if themachine cannot start normally, it is very likely that the carburetor oil needle needs tobe adjusted.

2. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start theflywheel, so that the mixing ratio of gasoline and air can reach the normal workingmixing ratio.

3. When the machine is stopped, the power switch should be turned off. The cooling.

Note:

1x Eachine ET8 Model

1x Engine Spare Parts  Start Device